Leaf Guards

Stop climbing the ladder.

We install two guard systems — Gutter Rx all-aluminum panels and LeafBlaster Pro stainless steel micro-mesh — and we'll tell you which one suits your roof, your trees, and your gutters. Both keep leaves, needles, seed pods, and critters out while letting water flow freely. Every installation begins with a complete gutter cleaning, at no extra charge.

Two guard systems

Gutter Rx or LeafBlaster Pro — matched to your roof.

Neither system is right for every home, so we don't sell one by default. Gutter Rx is an all-aluminum encapsulating panel; LeafBlaster Pro is a stainless steel micro-mesh with a patented corrugated profile. We look at your gutter size, roof pitch, the trees overhead, and what debris actually clogs your troughs, then recommend the one that will hold up.

Gutter Rx logo — The Cure for Your Clogged Gutters
All-aluminum panel

Gutter Rx

A perforated all-aluminum panel that screws to the front lip of the gutter and tucks under the first course of shingles. It fully encapsulates the trough — no plastic to brittle in the cold, no mesh to pack with pine needles.

  • All-aluminum — won't rust, rot, or warp
  • Fits 5" & 6" K-style gutters
  • Rated against pine needles & shingle grit
  • Sheds snow & ice with the roof
  • Birds, squirrels & wasps stay out
  • Lifetime no-clog guarantee

Best for: encapsulated protection and a color-matched gutter face

LeafBlaster Pro logo — contractor-installed stainless steel micro-mesh gutter protection
Stainless steel micro-mesh

LeafBlaster Pro

A stainless steel micro-mesh held in an aluminum extrusion that fastens to the front lip of your gutter. Patented corrugations stand the mesh up so wind lifts debris off the top instead of letting it settle, while water filters straight through. Made by Gutterglove and installed only by contractors — never sold at retail.

  • Stainless steel micro-mesh — blocks the finest debris
  • Corrugations shed leaves, needles & roof grit
  • Aluminum frame fastens to the gutter front lip
  • Fits any gutter and roof combo, 5" & 6"
  • Non-combustible — resists wind-blown embers
  • 40-year transferable manufacturer warranty

Best for: heavy tree cover, fine debris, and the toughest protection

Clogged → Cleaned → Protected

From overflowing to protected — in one visit.

Same gutter run, same day. We cleared the packed-in debris, flushed the trough, and capped it with new guards. No second trip, no surprise cleaning charge.

Three-stage gutter transformation: clogged with seed pods, cleaned out, and finished with new leaf guards
Three stages: 1 - Clogged & Overflowing, 2 - Fully Cleaned, 3 - Totally Protected.
Included with every install

A complete gutter cleaning. Always.

You should never pay extra to have your gutters cleaned the day we install your leaf guards — and you won't. Every Adventure Companies leaf guard installation begins with a full hand-cleaning of the existing trough, downspouts, and outlets. We flush-test the system to confirm it drains before we cap it off.

  • Full hand-removal of all debris
  • Downspouts flushed & flow-tested
  • Exterior gutter face wiped down
  • Guard panels installed same visit
Gutter packed with maple seed pods and debris before cleaning
Before — clogged
Gutter fully cleaned and ready for leaf guard installation
After cleaning — ready
Newly installed Gutter Rx all-aluminum leaf guards on a wooded property
Why Gutter Rx

Built for Minnesota trees, snow, and ice.

Gutter Rx is an all-aluminum, perforated panel that screws to the front lip of your gutter and tucks under the first course of shingles. No plastic to brittle in the cold. No mesh to clog with pine needles. No reverse-curve gimmicks that overshoot in a hard rain.

  • All-aluminum — won't rust, rot, or warp
  • Fits 5" & 6" K-style gutters
  • Tested against pine needles & shingle grit
  • Sheds snow & ice with the roof
  • Birds, squirrels & wasps stay out
  • Lifetime no-clog manufacturer warranty
LeafBlaster Pro stainless steel micro-mesh leaf guard installed along the gutter of an Andover, Minnesota home, tucked under the first course of shingles and fastened to the gutter front lip
Andover, MN — LeafBlaster Pro micro-mesh
LeafBlaster Pro logo
Recently installed in Andover, MN

Micro-mesh that lets the wind do the cleaning.

This Andover home got LeafBlaster Pro across its gutter runs. The stainless steel micro-mesh is fine enough to stop the smallest debris — the shingle grit and seed-pod pulp that slips through most screens — while the raised corrugations hold the mesh off the trough so wind can push leaves and needles over the edge.

The aluminum frame fastens to the front lip of the gutter and the mesh tucks under the first course of shingles, so nothing is punctured through the roof deck and your roof warranty stays intact. It carries a 40-year transferable manufacturer warranty and is non-combustible, which matters where wind-blown embers are a concern.

Our process

One visit. Four steps. Done right.

  1. 01

    Inspect & measure

    We walk every linear foot, check pitch and downspout placement, and flag any gutter repairs needed before guards go on.

  2. 02

    Complete cleaning

    Hand-removal of all debris from the trough, downspouts and outlets — included free with every installation.

  3. 03

    Flush-test

    Every run is flow-tested so we know water moves cleanly from the high point all the way to the splash block.

  4. 04

    Install your guards

    Gutter Rx panels or LeafBlaster Pro micro-mesh are fastened to the front lip, tucked under the first shingle course, and matched to your trim.

FAQ

Common questions about leaf guards.

Ready to retire the ladder?

Free on-site measurement. Free complete gutter cleaning included with every install. Gutter Rx or LeafBlaster Pro — whichever actually suits your roof.